| 11376926 |
Finger tab interface for vehicle pressure relief valve incorporated into a ventilation module for providing slow closing/opening of valve under low pressures resulting from a door slam event |
John E. Klinkman |
2022-07-05 |
| 11293471 |
Injection molded rivet-style fastener and housing with snap assembly functionality along with an injection molding process for producing such a rivet without an undercut feature |
— |
2022-04-05 |
| 10808744 |
Method for injection molded rivet style fastener and housing with snap assembly functionality along with an injection molding process for producing such a rivet without an undercut feature |
— |
2020-10-20 |
| 10619659 |
Closure assembly with collapsible crush barbs configured within a recess cavity defining edge of a first piece for engagement by a projection of a second piece when press fit within the recess cavity in order to engage the pieces together |
— |
2020-04-14 |
| 10179435 |
Roof ditch molding assembly and process with heated air assist |
Gerald N. Strich |
2019-01-15 |
| 10071522 |
Roof ditch molding process incorporating conformed shaping features in a molding fixture |
Gerald N. Strich |
2018-09-11 |
| 10052808 |
Assembly for creating an extruded pipe for use in a geothermal heat recovery operation |
Timothy John Brown |
2018-08-21 |
| 9841047 |
Fastener assembly associated with a mounting surface of such as an electronic control module or battery tray, the mounting surface incorporating a flexural and three dimensional configured receiving aperture profile for reliably seating and retaining an associated mounting fastener with low insertion force in comparison to higher extraction force and with minimal loss of material |
— |
2017-12-12 |
| 9744710 |
Assembly and process for creating an extruded pipe for use in a geothermal heat recovery operation |
Timothy John Brown |
2017-08-29 |
| 9162387 |
Assembly and process for creating an extruded pipe for use in a geothermal heat recovery operation |
Kevin J. Weingartz, Timothy John Brown |
2015-10-20 |
| 8955896 |
Tri-extruded roof ditch molding with hard and soft components including associated fastener system and method for heat forming the roof ditch molding |
Kevin C. Baxter, Wayne Bland |
2015-02-17 |
| 7551509 |
Power circuits for reducing a number of power supply voltage taps required for sensing a resistive memory |
Trevor D. Hardy, Ethan Williford, Mark D. Ingram |
2009-06-23 |
| 7433858 |
Rule selection engine |
Charles Rehberg |
2008-10-07 |
| 7366045 |
Power circuits for reducing a number of power supply voltage taps required for sensing a resistive memory |
Trevor D. Hardy, Ethan Williford, Mark D. Ingram |
2008-04-29 |
| 7269079 |
Power circuits for reducing a number of power supply voltage taps required for sensing a resistive memory |
Trevor D. Hardy, Ethan Williford, Mark D. Ingram |
2007-09-11 |
| 6700824 |
Distributed cell plate and/or digit equilibrate voltage generator |
Scott D. Van De Graaff |
2004-03-02 |
| 6496421 |
Distributed cell plate and/or digit equilibrate voltage generator |
Scott D. Van De Graaff |
2002-12-17 |
